Installation DSM 5.0-4528 Update 2

Installation DSM 5.0-4528 Update 2

4528 pae 파일을 다운로드 후 수동으로 업그레이드를 아래를 참조하여 하면 됩니다.

 

 

 

This instruction assumes that you have followed one of the tutorials (platform specific) listed below before applying this update.

• X64
• Hyper-V
• ESXi
• VirtualBox

DISCLAIMER!
I don’t take any responsibility for possible data loss or any other problem caused by following this installation tutorial.

Installatie video

Installatie DSM 5.0-4528 Update 2

 

1. Download DSM 5.0-4528 Update 2.
2. Go to  ‘Control Panel – Update & Restore’ and select ‘Manual DSM Update‘. click on ‘Browse‘ and select the update file from step 1. Click ‘OK‘. The file is uploaded.
   
3. After the upload is finished do NOT click ‘Yes‘ but go to step 4.
   
4. Open an ssh session (ie putty) to your Diskstation.
5. Login as ‘root‘.
6. Enter following commands:
   

    

   sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1

   mv /autoupd@te.info1 /autoupd@te.info

7. Go back to step 3 and click ‘Yes‘. The update is applied.
8. After a maximum of 10 minutes you can log in to your Diskstation.
9. After you have logged in reboot your Diskstation again so the the file ‘etxhci-hcd.ko‘ is updated.
   
10. Log in and verify your DSM version is 5.0-4528 Update 2.